VLAN TCC encapsulation on aggregated Ethernet interfaces

Aggregated Ethernet interfaces support VLAN translational cross-connect (TCC) encapsulation. For configuring VLAN TCC encapsulation, you must have the member links of aggregated Ethernet with VLAN TCC encapsulation supported hardware.
You must configure the following parameters to enable VLAN TCC encapsulation on aggregated Ethernet interfaces:

• Enable the extended-vlan-tcc option for aggregated Ethernet interfaces at the [edit interfaces interface-name encapsulation] hierarchy level to configure extended 802.1q tagging for TCC.
• Enable the vlan-tcc option for aggregated Ethernet interfaces at the [edit interfaces interface-name unit logical-unit-number encapsulation] hierarchy level to configure 802.1q tagging for TCC.
• Enable the inet-address option for aggregated Ethernet interfaces at the [edit interfaces interface-name unit logical-unit-number family tcc proxy] hierarchy level to configure proxy host address on the non-Ethernet side of Ethernet TCC circuits.
• Enable the inet-address option for aggregated Ethernet interfaces at the [edit interfaces interface-name unit logical-unit-number family tcc remote] hierarchy level to configure remote host address on the non-Ethernet side of Ethernet TCC circuits.
• Enable the mac-address option for aggregated Ethernet interfaces at the [edit interfaces interface-name unit logical-unit-number family tcc remote] hierarchy level to configure remote MAC address on the non-Ethernet side of Ethernet TCC circuits.
• Enable the tcc option for aggregated Ethernet interfaces at the [edit interfaces interface-name unit logical-unit-number family] hierarchy level to configure the TCC protocol suite.