Feature Explorer AI AI

×

Subscribe now to get the Latest Updates

Watch a 2-minute overview video

PCEP multipath support for SR-TE

More Information:

PCEP multipath support for SR-TE

You can configure the multipath feature (primary or secondary paths) for Path Computation Element Protocol (PCEP) segment routing-traffic engineering (SR-TE) as defined in draft-ietf-pcemultipath-06. We support the following multipath capabilities: When the PCEP multipath feature is enabled, you can configure multiple primary or secondary paths in a candidate path that you configure and control using Path Computation Client (PCC).Note that the PCEP multipath feature is enabled by default. When the PCEP multipath feature is disabled, you can configure only one primary path in a candidate path. Note that a secondary path configuration is not allowed. The PCEP multipath feature removes the compute-profile restriction of 1 on the maximum number of segment lists (maximum-computed-segment-lists). NOTE: When PCEP multipath is enabled, PCCD will not send constraints for PCC-controlled candidate paths.
Product / Application Software Introduced Release
ACX7020 Junos OS Evolved 25.2R1
ACX7020 Junos OS Evolved 24.4R2
ACX7024 Junos OS Evolved 24.4R1
ACX7024X Junos OS Evolved 24.4R1
ACX7100-32C Junos OS Evolved 24.4R1
ACX7100-48L Junos OS Evolved 24.4R1
ACX7332 Junos OS Evolved 24.4R1
ACX7348 Junos OS Evolved 24.4R1
ACX7509 Junos OS Evolved 24.4R1
MX480 Junos OS 22.4R1
PTX10008 Junos OS 22.4R1
QFX5200-32C Junos OS 22.4R1