Static segment routing label switched path

A set of explicit segment routing paths are configured on the ingress router of a non-colored static segment routing label switched path (LSP) by configuring the segment-list statement at the [edit protocols source-packet-routing] hierarchy level.

You can configure the segment routing LSP by configuring the source-routing-path statement at [edit protocols source-packet-routing] hierarchy level. The segment routing LSP has a destination address and one or more primary paths and optionally secondary paths that refer to the segment list. Each segment list consists of a sequence of hops. For non-colored static segment routing LSP, the first hop of the segment list specifies an immediate next hop IP address and the second to Nth hop specifies the segment identifies (SID) labels corresponding to the link or node which the path traverses. The route to the destination of the segment routing LSP is installed in inet.3 table. The adjacency segments, node segments, and prefix segments can be provisioned on transit routers by configuring static MPLS segment LSPs at the [protocols mpls static-label-switched-path] hierarchy level