Physical Ethernet interface sensor support on JTI

You can use Junos telemetry interface (JTI) and remote procedure calls (gRPC) services or gRPC Network Management Interface (gNMI) services to export physical Ethernet interface statistics to outside collectors. This feature supports OpenConfig model openconfig-if-ethernet.yang (physical interface level) version 2.6.2 (no configuration). Both streaming and ON-CHANGE statistics are supported using the following resource paths:

• /interfaces/interface/ethernet/state/mac-address (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/auto-negotiate (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/duplex-mode (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/port-speed (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/enable-flow-control (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/hw-mac-address (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/negotiated-duplex-mode (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/negotiated-port-speed (with ON_CHANGE support)
• /interfaces/interface/ethernet/state/counters/in-mac-control-frames
• /interfaces/interface/ethernet/state/counters/in-mac-pause-frames
• /interfaces/interface/ethernet/state/counters/in-oversize-frames
• /interfaces/interface/ethernet/state/counters/in-jabber-frames
• /interfaces/interface/ethernet/state/counters/in-fragment-frames
• /interfaces/interface/ethernet/state/counters/in-8021q-frames
• /interfaces/interface/ethernet/state/counters/in-crc-errors
• /interfaces/interface/ethernet/state/counters/in-block-errors
• /interfaces/interface/ethernet/state/counters/out-mac-control-frames
• /interfaces/interface/ethernet/state/counters/out-mac-pause-frames