| OAM / Ethernet OAM Protocols / |
Enhanced scale support for MIPs and MEPs per chassis |
| OAM / Ethernet OAM Protocols / |
Ethernet OAM |
| OAM / Ethernet OAM Protocols / |
OAM with Layer 2 bridging as a transport mechanism |
| OAM / Ethernet OAM Protocols / |
Rate limiting of Ethernet OAM messages |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
CFM/Y.1731: Ethernet delay measurement (ETH-DM) |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
CFM/Y.1731: Ethernet synthetic loss measurement |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Extending Y.1731 functionality for VPLS to support delay and delay variation |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Extending Y.1731 functionality on VPWS to support delay, delay variation, and frameloss measurement |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
ITU-T Y.1731 ETH-LM, ETH-SLM, and ETH-DM |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Inline (ITU-T Y.1731) performance monitoring |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Telemetry: Jvision:Y.1731 SLM,DM |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (Bridge) - Down MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (Bridge) - UP MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (CCC) - Down MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (CCC) - UP MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (EVPN) - Down MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 - Delay Measurement (EVPN) - UP MEP |
| OAM / Ethernet OAM Protocols / ITU-T Y.1731 Ethernet Service OAM / |
Y.1731 functionality extended to Down MEPS |
| OAM / Ethernet OAM Protocols / Maintenance End Points / |
CFM: 802.1ag: Down MEP, L3 interface |
| OAM / Ethernet OAM Protocols / Maintenance End Points / |
CFM: 802.1ag: Down MEP, family CCC |
| OAM / Ethernet OAM Protocols / Maintenance End Points / |
CFM: 802.1ag: Up MEP, family CCC |
| OAM / Ethernet OAM Protocols / Maintenance End Points / |
Configuration support for multiple MEPs for interfaces belonging to a single VPLS service, CCC, or bridge domain |
| OAM / Ethernet OAM Protocols / Maintenance End Points / |
RDI |
| OAM / Ethernet OAM Protocols / Maintenance Intermediate Points / |
8000 maintenance association intermediate points per chassis |
| OAM / Ethernet OAM Protocols / Maintenance Intermediate Points / |
Continuity fault management: 802.1ag MIP |
| OAM / Ethernet OAM Protocols / Maintenance Intermediate Points / |
Continuity fault management: Monitoring on pseudowire services interfaces |
| OAM / IP OAM Protocols / |
RPM IPv4/IPv6 client with Routing Engine and PFE timestamping, RPM IPv4/IPv6 server with PFE timestamping, TWAMP-managed IPv4 client and server, TWAMP Light IPv4/IPv6 client and server |
| OAM / IP OAM Protocols / |
RPM and TWAMP |
| OAM / IP OAM Protocols / |
Specifying a maximum hop count for RPM and TWAMP probes |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Bandwidth Profile for CIR and EIR |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Frame Loss Ratio |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Frame Transfer Delay |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Frame pattern |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: General setting of Test |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Min and Max measurements |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Performance measurement in-two-way/round-trip fashion |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Support Test with only one active Service |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Support Traffic policing test step |
| OAM / IP OAM Protocols / ITU-T Y.1564 Ethernet Service Activation Test Methodology / |
Y.1564: Support for Colour awareness |
| OAM / IP OAM Protocols / RFC 2544 Based Benchmarking Tests / |
RFC 2544 Based Latency Tests |
| OAM / IP OAM Protocols / RFC 2544 Based Benchmarking Tests / |
RFC 2544 Based Throughput Tests |
| OAM / OAM: CFM / |
802.1ag CC monitoring on active and standby pseudowires |
| OAM / OAM: CFM / |
802.1ag CFM monitoring enhancements |
| OAM / OAM: CFM / |
802.1ag CFM monitoring with service protection |
| OAM / OAM: CFM / |
802.1ag Ethernet OAM connectivity fault management (CFM) |
| OAM / OAM: CFM / |
802.1ag Ethernet OAM for CCC encapsulated packets |
| OAM / OAM: CFM / |
802.1ag Ethernet OAM for VPLS |
| OAM / OAM: CFM / |
802.1ag optional type, length, and value (TLV) support |
| OAM / OAM: CFM / |
CFM Action Profile to Bring Down a Group of Logical Interfaces |
| OAM / OAM: CFM / |
CFM CCM for LAG |
| OAM / OAM: CFM / |
CFM CCM support on PS interfaces |
| OAM / OAM: CFM / |
CFM CCM support on pseudowire and PWHT service interfaces |
| OAM / OAM: CFM / |
CFM action profiles |
| OAM / OAM: CFM / |
CFM enhancement for interoperability during unified ISSU |
| OAM / OAM: CFM / |
CFM for MIP in an EVPN with ETREE and ELAN Services and up MEP in EVPN with ETREE services |
| OAM / OAM: CFM / |
CFM in an EVPN network |
| OAM / OAM: CFM / |
CFM monitoring between CE and PE devices |
| OAM / OAM: CFM / |
CFM on demux interfaces |
| OAM / OAM: CFM / |
CFM process flooding to interfaces based on mesh groups |
| OAM / OAM: CFM / |
CFM support for PBB |
| OAM / OAM: CFM / |
CFM support in EVPN-VPWS |
| OAM / OAM: CFM / |
CFM triggered Node/Link protection for P2P LSP |
| OAM / OAM: CFM / |
CFM: 802.1ag: Maintenance intermediate point (MIP) |
| OAM / OAM: CFM / |
Connection protection optimization in CFM |
| OAM / OAM: CFM / |
Distinguish each 802.1ag connection by vlan-id |
| OAM / OAM: CFM / |
Distribution of Ethernet connectivity fault management sessions |
| OAM / OAM: CFM / |
Enhanced CFM |
| OAM / OAM: CFM / |
Enhanced fault management features |
| OAM / OAM: CFM / |
Ethernet 802.1ag support on trunk port |
| OAM / OAM: CFM / |
Ethernet CFM - Connection protection for Ethernet pseudowires |
| OAM / OAM: CFM / |
Ethernet CFM - Path protection for Ethernet pseudowires |
| OAM / OAM: CFM / |
Ethernet OAM Rx statistics for CCM |
| OAM / OAM: CFM / |
Ethernet OAM and Metro Ethernet services over segment routing |
| OAM / OAM: CFM / |
Ethernet expected defect (ETH-ED) |
| OAM / OAM: CFM / |
G.8032 Ethernet automatic protection switching (APS) |
| OAM / OAM: CFM / |
IEEE 802.1ag OAM loopback functions |
| OAM / OAM: CFM / |
IEEE 802.1ag and ITU-T Y.1731 OAM protocols on up MEPs |
| OAM / OAM: CFM / |
MEF-36-compliant performance monitoring |
| OAM / OAM: CFM / |
MIPs for Ethernet OAM 802.1ag CFM Protocol at a bridge-domain level |
| OAM / OAM: CFM / |
Node-link protection based on CFM State Change (P2MP) |
| OAM / OAM: CFM / |
Node-link protection based on CFM State Change (P2P) |
| OAM / OAM: CFM / |
OAM on S-VLAN bidirectional state propagation |
| OAM / OAM: CFM / |
Sender ID TLV |
| OAM / OAM: CFM / |
Telemetry support in EVO (along with EVPN-VXLAN sensors) |
| OAM / OAM: CFM / |
Transparent forwarding of CFM packets over VPLS |
| OAM / OAM: LFM / |
Dying-gasp PDU generation |
| OAM / OAM: LFM / |
Ethernet loss measurement counter for each class in a multiclass environment |
| OAM / OAM: LFM / |
Fault detection using continuity check protocol |
| OAM / OAM: LFM / |
Fault verification and isolation using loopback protocol |
| OAM / OAM: LFM / |
IEEE 802.1ag OAM Linktrace Protocol |
| OAM / OAM: LFM / |
Inline link fault management |
| OAM / OAM: LFM / |
LFM: Link fault management, 802.3ah |
| OAM / OAM: LFM / |
Remote fault notification for 10-Gigabit Ethernet interfaces |
| OAM / OAM: LFM / |
Remote loopback feature for VDSL interfaces |
| OAM / OAM: MPLS-TP / |
MPLS OAM |
| OAM / OAM: MPLS-TP / |
MPLS Ping - L3VPN |
| OAM / OAM: MPLS-TP / |
MPLS Traceroute - L3VPN |
| OAM / OAM: MPLS-TP / |
MPLS Transport Profile (MPLS-TP) |
| OAM / OAM: MPLS-TP / |
MPLS ping: BGP-LU |
| OAM / OAM: MPLS-TP / |
MPLS ping: L2 circuit |
| OAM / OAM: MPLS-TP / |
MPLS ping: L2VPN |
| OAM / OAM: MPLS-TP / |
MPLS ping: LDP LSP |
| OAM / OAM: MPLS-TP / |
MPLS ping: RSVP-TE LSP |
| OAM / OAM: MPLS-TP / |
MPLS ping: With Explicit Null labels |
| OAM / OAM: MPLS-TP / |
MPLS ping: With ultimate-hop popping |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: BGP-LU |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: L2 circuit |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: L2VPN |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: LDP LSP |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: RSVP-TE LSP |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: With Explicit Null labels |
| OAM / OAM: MPLS-TP / |
MPLS traceroute: With ultimate-hop popping |
| OAM / OAM: MPLS-TP / |
OAM support for labeled IS-IS flex algo segment routing paths |
| OAM / OAM: MPLS-TP / |
OAM support for labeled OSPF flex algo segment routing paths |
| OAM / OAM: MPLS-TP / |
SPRING: MPLS ping for static SR paths |
| OAM / OAM: MPLS-TP / |
SPRING: MPLS ping for static SR-TE paths |
| OAM / OAM: MPLS-TP / |
SPRING: MPLS traceroute for static SR paths |
| OAM / OAM: MPLS-TP / |
SPRING: MPLS traceroute for static SR-TE paths |
| OAM / OAM: RPM / |
RPM: IPv6 destinations |
| OAM / OAM: RPM / Inline RPM Services / |
Activating or deactivating static routes on the basis of RPM test results |
| OAM / OAM: RPM / Inline RPM Services / |
Additional filtering on show command output of RPM probes |
| OAM / OAM: RPM / Inline RPM Services / |
Hardware timestamping of RPM probe messages |
| OAM / OAM: RPM / Inline RPM Services / |
IPv6 probes for optimized CLI configuration of RPM tests |
| OAM / OAM: RPM / Inline RPM Services / |
Pseudo-hardware RPM timestamps |
| OAM / OAM: RPM / Inline RPM Services / |
RPM Probe |
| OAM / OAM: RPM / Inline RPM Services / |
RPM Timestamp Probe |
| OAM / OAM: RPM / Inline RPM Services / |
RPM UDP Timestamp Probe (IPv6) with link-local address |
| OAM / OAM: RPM / Inline RPM Services / |
RPM and TWAMP hardware-timestamp and RTT measurement |
| OAM / OAM: RPM / Inline RPM Services / |
RPM hardware timestamps with routed VLAN interfaces |
| OAM / OAM: RPM / Inline RPM Services / |
RPM jitter measurement enhancement |
| OAM / OAM: RPM / Inline RPM Services / |
RPM support for IPsec and GRE tunnels |
| OAM / OAM: RPM / Inline RPM Services / |
RPM timestamp support for Layer 2 services |
| OAM / OAM: RPM / Inline RPM Services / |
RPM timestamping extension |
| OAM / OAM: RPM / Inline RPM Services / |
RPM with IP monitoring withdraw option |
| OAM / OAM: RPM / Inline RPM Services / |
RPM-client and server on same interface |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Configurable DSCP/TC and for probes |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Configurable TTL for probes |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: HTTP get probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: HTTP get probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: HTTP metadata get probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: HTTP metadata get probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping probe (IPv6) with link-local Address |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping timestamp probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping timestamp probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: ICMP ping timestamp probe (IPv6) with link-local Address |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: IPv4 destinations |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Real-time Performance Monitoring |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Static routes tracking: Multiple next hops support |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Static routes tracking: Preference and tag support |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: Syslog reporting |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: TCP probe: IPv4 |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: TCP probe: IPv6 |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP ping probe |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP ping probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP ping probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP ping probe (IPv6) with link-local address |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP timestamp probe |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP timestamp probe (IPv4) |
| OAM / OAM: RPM / Inline RPM Services / |
RPM: UDP timestamp probe (IPv6) |
| OAM / OAM: RPM / Inline RPM Services / |
Support for the RPM timestamp on the Services SDK |
| OAM / OAM: TWAMP / |
Simple Two-Way Active Measurement Protocol (STAMP) |
| OAM / OAM: TWAMP / TWAMP Light / |
BGP-LS : TWAMP Light - Link Delay Advertisement - IS-IS Extended Reachability TLV |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light HW Offload |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light IPv4 Client |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light IPv4 Server |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light IPv6 Client |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light IPv6 Server |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light: (client & server) IPv4 |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light: (client & server) IPv6: Link-local address |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP Light: (client & server) IPv6: PFE timestamp |
| OAM / OAM: TWAMP / TWAMP Light / |
TWAMP probes in segment routing |
| OAM / OAM: TWAMP / TWAMP Light / |
Two-Way Active Measurement Protocol (TWAMP) Light IPv6 client and server |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
Hardware timestamping of Two-Way Active Measurement Protocol (TWAMP) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
Inline TWAMP requester |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
Inline Two-Way Active Measurement Protocol (TWAMP) server |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP (RFC 5357) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP Authentication Mode |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP Auto-Restart |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP Generation for IPv4 (GRT and VFR contexts) [H/W Timestamp] |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP Reflection and Generation for IPv6 (GRT and VFR contexts) [H/W Timestamp] |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP Reflection for IPv4 (GRT and VFR contexts) [H/W Timestamp] |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP supports for ALG traffic |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: Bypass hash-based load balancing for sending test probes over a LAG member |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: Client endpoint |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: HTTP get probe (IPv4) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: HTTP get probe (IPv6) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: HTTP metadata get probe (IPv4) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: HTTP metadata get probe (IPv6) |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: IPv4 UDP probe generation and reception |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: IPv4 UDP probe reflection |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: Server endpoint |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
TWAMP: Syslog reporting |
| OAM / OAM: TWAMP / TWAMP Managed Service / |
Transmission of probes between a TWAMP client and a TWAMP server |