Hardware Compatibility Tool

QSFP+ 40 Gigabit Ethernet Direct Attach Copper (Twinax Copper Cable) for 50cm Transmission

100G QSFP28 to SFP28 4x25G Direct Attach Copper Breakout (twinax copper cable) 1m

100G QSFP28 to SFP28 4x25G Direct Attach Copper Breakout (twinax copper cable) 3m

100G QFP28 to SFP28 4x25G Direct Attach Copper Breakout (twinax copper cable) 5m

100GE-AOC OM3 15m 850nm 70C

100GE-AOC OM3 1m 850nm 70C

100GE-AOC OM3 20m 850nm 70C

100GE-AOC OM3 30m 850nm 70C

100GE-AOC OM3 3m 850nm 70C

100GE-AOC OM3 5m 850nm 70C

100GE-AOC OM3 7m 850nm 70C

100G DAC Twinax Copper Cable 1M

100G DAC Twinax Copper Cable 3M

100G DAC Twinax Copper Cable 5M

100GBASE-BXSR OM4 100m 850nm 70C

100G CWDM4 optics

QSFP28 100GBase-LR4 Optics for up to 10km transmission over serial SMF

QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF

QSFP28 100GBase-SR4 Optics for up to 100m transmission over parallel MMF

QSFP+ 40GBase-LR4 40 Gigabit Optics for up to 10km transmission on SMF

QSFP+ 40GBASE-LX4 40 Gigabit Optics for up to 150m transmission with OM4 over duplex MMF

QSFP+ 40GBase-ER4 40 Gigabit Optics, 1310nm for up to 40km Transmission on SMF
Note: Attenuators should be used when the module is in the optical loopback mode so as not to exceed the max Rx power and Rx damage thresholds.

QSFP+ 40G breakout into 4x10GBASE LR up to 10km SMF, MPO-12 APC Receptacle

40G active optical breakout cable for 10M

40G active optical breakout cable for 1M

40G active optical breakout cable for 3M

40G active optical breakout cable for 5M

40G active optical breakout cable for 7M

QSFP+ 40GBase Direct Attach Copper Cable 5-meter, passive

QSFP+ 40GBase Direct Attach Copper Cable 5-meter, active

QSFP+ 40GBase Direct Attach Copper Cable 7-meter, active

40GBASE-BXSR OM3 100m 850nm 70C

QSFP+ 40GBase-SR4 40 Gigabit Optics, 850nm for up to 150m transmission on MMF

QSFP+ Cable Assy, 1m, 30AWG, Passive, Programmable ID

QSFP+ Cable Assy, 3m, 30AWG, Passive, Programmable ID

QSFP+ Cable Assy, 5m, 26AWG, Passive, Programmable ID

QSFP28 100G 4WDM-40 transceiver

QSFP-28, 100G-CWDM4 Transceiver

QSFP28 CWDM4 for <70C operation

Extended temperature capable 100GE CWDM4 optics (upto 85C)

QSFP28 100G-CWDM4 2km 1310nm

QSFP28 100G DAC 50 cm

QSFP28 100GBASE-DR; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 500 m; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP28 100G-ER4 Lite Ethernet only module

QSFP28 100G-FR/100GBASE-FR1; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 2 km; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP28 100G-LR/100GBASE-LR1; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 10 km; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP-28, 100G-LR4 Transceiver

QSFP28 100GBASE-LR4 Extended Temperature (-5 through 85°C)

QSFP28 100GE-LR4 10km 1310nm Blue Pull

100G-LR4 Ethernet only QSFP28 Module T2

QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF

QSFP28 100G SR BiDi Transceiver

QSFP-28, 100G-SR4 Transceiver

QSFP28 100GE-SR4 OM4 100m Beige Pull MPO

100G-SR4 Ethernet only QSFP28 Module T2

QSFP28 100G ZR4 Transceiver

QSFP28, 100GBASE-CWDM4

100GBASE-LR4 QSFP28 pluggable module, support only Ethernet rate

100GBASE-SR4 QSFP28 pluggable module, support only Ethernet rate

QSFP+ 40GBase-LR4 40 Gigabit Optics for up to 10km transmission on SMF

QSFP+ 40GBase-LX4 40 Gigabit Optics, 100m(150m) with OM3(OM4) duplex MMF fiber

QSFP+ 40GBase-ER4 40 Gigabit Optics, SMF for 40Km transmission
Note: Attenuators should be used when the module is in the optical loopback mode so as not to exceed the max Rx power and Rx damage thresholds.

40GE QSFP+ LR4 Pluggable Optics module

40GE QSFP+ SR4 Pluggable Optics module

40G QSFP+ breakout into 4x10GBASE LR Ethernet module

40GE QSFP+ Optical Transceiver, LR4,10km