Hardware Compatibility Tool

100GBASE-LR4 CFP (2nd Generation) Pluggable Module Compliant with IEEE 802.3ba

MIC with ten SFP+ 10-Gigabit Ethernet ports

MIC with one CFP 100-Gigabit Ethernet port

MIC with twenty 1-Gigabit Ethernet SFP Ethernet ports

MIC with two QSFP+ Ethernet ports

I/O card with 40 Gigabit Ethernet SFP ports

I/O card with four 10-Gigabit Ethernet XFP ports

Flex IOC with slots for two port modules

SRX5K-IOC4-10G is a fixed-configuration interface card with a Packet Forwarding Engine that provides 400-Gbps line rate. This interface card provides scalability in bandwidth and services to the SRX5400, SRX5600 and SRX5800 Services Gateways.

SRX5K-IOC4-MRAT is a fixed-configuration interface card with a Packet Forwarding Engine that provides up to 480-Gbps (240-Gbps per PIC slot) line rate. This interface card provides scalability in bandwidth and services to the SRX5400, SRX5600, and SRX5800 Services Gateways.
Note: SRX5K-IOC4-MRAT cards do not support plug-in Modular Interface Cards (MICs).

Routing Engine for SRX5400, SRX5600, and SRX5800 Services Gateways

Routing Engine for SRX5400, SRX5600, and SRX5800 Services Gateways

SRX5K-RE3-128G is Routing Engine for SRX5400, SRX5600, and SRX5800 Services Gateways, based on Intel’s Haswell-EP CPU with 6 cores, and 128G of DDR4 memory. It provides increased control plane performance and scalability along with virtualization features in SRX5K chassis

SCB with slot for Routing Engine

SCB3 with slot for Routing Engine

The SRX5K-SCB4 (SCB4) Enhanced Switch Control Board provides improved fabric performance and bandwidth capabilities for high-capacity line cards using the ZF-based switch fabric.

SRX5K-SCBE with slot for Routing Engine

SPC with two SPUs

SPC with four SPUs

SRX5K-SPC3 Services Processing Cards (SPC) provide additional processing power to run integrated services such as firewall, IPSec, and IDP. The SRX5K-SPC3 contains two Services Processing Units (SPUs) with 128GB of memory per SPU.