Hardware Compatibility Tool

Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) LR Optics

Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) SR Optics

QSFP+ 40GBASE-LX4 40 Gigabit Optics for up to 150m transmission with OM4 over duplex MMF

SFP+ 10GBase-LR 10 Gigabit Ethernet Optics, 1310nm for 10km transmission on SMF

SFP+ 10GBase-SR 10 Gigabit Ethernet Optics, 850nm for up to 300m transmission on MMF

SFP+, 10G-ER Transceiver

SFP+, 10G-LR Transceiver type 2

SFP+, 10G-SR Transceiver

SFP+ 10GE-SR MMF 1.0W Beige Bail

10 Gigabit Ethernet Extended Reach SFP+

40km SFP Plus optical module supporting an extended range of operating temperature up to 85C

10 Gigabit Ethernet Short Reach SFP+

40GE QSFP+ Optical Transceiver, LR4,10km

40-Gigabit Ethernet multi-mode optic module

Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) LR Optics

Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) SR Optics

10GE SFP+ Optical Transceiver,LR,10km

SFP+ 10GE pluggable transceiver, short reach, 850nm for 200m transmission, Extended temperature 0-85

SRX5K-IOC4-10G is a fixed-configuration interface card with a Packet Forwarding Engine that provides 400-Gbps line rate. This interface card provides scalability in bandwidth and services to the SRX5400, SRX5600 and SRX5800 Services Gateways.

SRX5K-IOC4-MRAT is a fixed-configuration interface card with a Packet Forwarding Engine that provides up to 480-Gbps (240-Gbps per PIC slot) line rate. This interface card provides scalability in bandwidth and services to the SRX5400, SRX5600, and SRX5800 Services Gateways.
Note: SRX5K-IOC4-MRAT cards do not support plug-in Modular Interface Cards (MICs).

Routing Engine for SRX5400, SRX5600, and SRX5800 Services Gateways

SRX5K-RE3-128G is Routing Engine for SRX5400, SRX5600, and SRX5800 Services Gateways, based on Intel’s Haswell-EP CPU with 6 cores, and 128G of DDR4 memory. It provides increased control plane performance and scalability along with virtualization features in SRX5K chassis

SCB3 with slot for Routing Engine

The SRX5K-SCB4 (SCB4) Enhanced Switch Control Board provides improved fabric performance and bandwidth capabilities for high-capacity line cards using the ZF-based switch fabric.

SRX5K-SCBE with slot for Routing Engine

SPC with four SPUs

SRX5K-SPC3 Services Processing Cards (SPC) provide additional processing power to run integrated services such as firewall, IPSec, and IDP. The SRX5K-SPC3 contains two Services Processing Units (SPUs) with 128GB of memory per SPU.