-- Juniper Enterprise Specific MIB: Interface MIB Extension -- -- Copyright (c) 1999-2012, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-IF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Integer32, Counter64, Counter32 FROM SNMPv2-SMI CounterBasedGauge64 FROM HCNUM-TC ifEntry,ifIndex FROM IF-MIB TimeStamp, TruthValue FROM SNMPv2-TC jnxMibs FROM JUNIPER-SMI; ifJnx MODULE-IDENTITY LAST-UPDATED "201610130000Z" -- Thu Oct 13 19:00:00 2016 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "added new values for ifJnxMediaConfigSpeedMap" REVISION "201610130000Z" -- 13 Oct, 2016 DESCRIPTION "defined new OID ifJnxMediaHighSpeed as part of ifJnxMediaTable" REVISION "201609220000Z" -- 22 Sep, 2016 DESCRIPTION "defined new OID ifJnxMediaConfigSpeedMap as part of ifJnxMediaTable" REVISION "201608230000Z" -- 23 Aug, 2016 DESCRIPTION "The MIB modules extends the ifTable as defined in IF-MIB." REVISION "201601140000Z" -- 14 Jan, 2016 DESCRIPTION "New table ifJnxMediaTable is added" REVISION "201105100000Z" -- 10 May, 2011 DESCRIPTION "New Layer2 Policer Counters Added to ifJnxTable for MX Series only" REVISION "201109220000Z" DESCRIPTION "Added new OIDs Crc and Fcs Erros. Added new Trap ifJnxErrors" REVISION "200706050000Z" -- 05 June, 2007 DESCRIPTION "New Time Domain Reflectometery Added" REVISION "200210310000Z" -- 31 Oct, 2002 DESCRIPTION "New error counters added to ifJnxTable" REVISION "200106210000Z" -- 21 June, 2001 DESCRIPTION "New objects ifHCIn1SecRate and ifHCOut1SecRate added" REVISION "200103150000Z" -- 15 March, 2001 DESCRIPTION "New objects ifHCIn1SecOctets and ifHCOut1SecOctets added" REVISION "201510150000Z" -- 14 Oct, 2015 DESCRIPTION "Initial Version" ::= { jnxMibs 3 } -- -- This table augments ifTable -- ifJnxTable OBJECT-TYPE SYNTAX SEQUENCE OF IfJnxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table." ::= { ifJnx 1 } ifJnxEntry OBJECT-TYPE SYNTAX IfJnxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." AUGMENTS { ifEntry } ::= { ifJnxTable 1 } IfJnxEntry ::= SEQUENCE { ifIn1SecRate Gauge32, ifIn1SecOctets Gauge32, ifIn1SecPkts Gauge32, ifOut1SecRate Gauge32, ifOut1SecOctets Gauge32, ifOut1SecPkts Gauge32, ifHCIn1SecRate CounterBasedGauge64, ifHCOut1SecRate CounterBasedGauge64, ifJnxInErrors Counter64, ifJnxInFrameErrors Counter64, ifJnxInQDrops Counter64, ifJnxInRunts Counter64, ifJnxInGiants Counter64, ifJnxInDiscards Counter64, ifJnxInHslCrcErrors Counter64, ifJnxInHslFifoOverFlows Counter64, ifJnxInL3Incompletes Counter64, ifJnxInL2ChanErrors Counter64, ifJnxInL2MismatchTimeouts Counter64, ifJnxInInvalidVCs Counter64, ifJnxInFifoErrors Counter32, ifJnxBucketDrops Counter64, ifJnxSramErrors Counter32, ifJnxOutErrors Counter64, ifJnxCollisions Counter64, ifJnxCarrierTrans Counter64, ifJnxOutQDrops Counter64, ifJnxOutAgedErrors Counter64, ifJnxOutFifoErrors Counter32, ifJnxOutHslFifoUnderFlows Counter64, ifJnxOutHslCrcErrors Counter32, ifJnxCrcErrors Counter64, ifJnxFcsErrors Counter64, ifHCIn1SecOctets CounterBasedGauge64, ifHCOut1SecOctets CounterBasedGauge64 } ifIn1SecRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer." ::= { ifJnxEntry 1 } ifIn1SecOctets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next higher (sub-)layer." ::= { ifJnxEntry 2 } ifIn1SecPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second (pps), delivered by this (sub-)layer to its next higher (sub-)layer." ::= { ifJnxEntry 3 } ifOut1SecRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer." ::= { ifJnxEntry 4 } ifOut1SecOctets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next lower (sub-)layer." ::= { ifJnxEntry 5 } ifOut1SecPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second (pps), delivered by this (sub-)layer to its next lower (sub-)layer." ::= { ifJnxEntry 6 } ifHCIn1SecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer. This object is a 64 bit version of ifIn1SecRate." ::= { ifJnxEntry 7 } ifHCOut1SecRate OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer. This object is a 64 bit version of ifOut1SecRate." ::= { ifJnxEntry 8 } ifJnxInErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Errors: The sum of the incoming frame aborts and FCS errors." ::= { ifJnxEntry 9 } ifJnxInFrameErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Framing Errors: The number of input packets which were misaligned." ::= { ifJnxEntry 10 } ifJnxInQDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Drops: The number of packets dropped by the input queue of the I/O Manager ASIC." ::= { ifJnxEntry 11 } ifJnxInRunts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Runts: Frames received that are smaller than the runt threshold." ::= { ifJnxEntry 12 } ifJnxInGiants OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Giants: Frames received that are larger than the giant threshold." ::= { ifJnxEntry 13 } ifJnxInDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Policed Discards: Frames that the incoming packet match code discarded because they were not recognized or of interest." ::= { ifJnxEntry 14 } ifJnxInHslCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while receiving packets." ::= { ifJnxEntry 15 } ifJnxInHslFifoOverFlows OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "HS link FIFO overflows: The number of FIFO overflows on the high-speed links between the ASICs responsible for handling the router interfaces." ::= { ifJnxEntry 16 } ifJnxInL3Incompletes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "L3 incompletes: The number of incoming packets that fail Layer 3 sanity checks of the header." ::= { ifJnxEntry 17 } ifJnxInL2ChanErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "L2 channel errors: the number of incoming packets for which the sofware could not find a valid logical interface." ::= { ifJnxEntry 18 } ifJnxInL2MismatchTimeouts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "L2 mismatch timeouts: The count of malformed or short packets that cause the incoming packet handler to discard the frame as unreadable." ::= { ifJnxEntry 19 } ifJnxInInvalidVCs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid VCs: Number of cells that arrived for a nonexistent virtual circuit." ::= { ifJnxEntry 20 } ifJnxInFifoErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "FIFO errors: The number of FIFO errors in the receive direction as reported by the ASIC on the PIC." ::= { ifJnxEntry 21 } ifJnxBucketDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bucket drops: Drops due to traffic load exceeding the interface transmit/receive leaky bucket configuration." ::= { ifJnxEntry 22 } ifJnxSramErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "SRAM errors: This counter increments when a hardware error has occurred in the SRAM on the PIC." ::= { ifJnxEntry 23 } ifJnxOutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Errors: The sum of the outgoing frame aborts and FCS errors." ::= { ifJnxEntry 24 } ifJnxCollisions OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Collisions: The number of output collisions detected on this interface." ::= { ifJnxEntry 25 } ifJnxCarrierTrans OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Carrier transitions: The number of times the interface saw the carrier signal transition." ::= { ifJnxEntry 26 } ifJnxOutQDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Drops: The number of packets dropped by the output queue of the I/O Manager ASIC." ::= { ifJnxEntry 27 } ifJnxOutAgedErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Aged packets: The number of packets that remained in shared packet SDRAM for so long that the system automatically purged them." ::= { ifJnxEntry 28 } ifJnxOutFifoErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "FIFO errors: The number of FIFO errors in the transmit direction as reported by the ASIC on the PIC." ::= { ifJnxEntry 29 } ifJnxOutHslFifoUnderFlows OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "HS link FIFO underflows: The number of FIFO underflows on the high-speed links between the ASICs responsible for handling the router interfaces." ::= { ifJnxEntry 30 } ifJnxOutHslCrcErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while transmitting packets." ::= { ifJnxEntry 31 } ifJnxCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "CRC Errors: The number of CRC errors" ::= { ifJnxEntry 32 } ifJnxFcsErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "FCS Errors: The number of FCS errors" ::= { ifJnxEntry 33 } ifHCIn1SecOctets OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes per second (Bps), delivered by this (sub-)layer to its next higher (sub-)layer. This object is a 64 bit version of ifIn1SecOctets." ::= { ifJnxEntry 34 } ifHCOut1SecOctets OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes per second (Bps), delivered by this (sub-)layer to its next lower (sub-)layer. This object is a 64 bit version of ifOut1SecOctets." ::= { ifJnxEntry 35 } -- -- This table augments ifTable to map to Chassis MIB tables -- ifChassisTable OBJECT-TYPE SYNTAX SEQUENCE OF IfChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table to facilitate the identification of interfaces and its mapping into the Chassis MIB tables." ::= { ifJnx 2 } ifChassisEntry OBJECT-TYPE SYNTAX IfChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." AUGMENTS { ifEntry } ::= { ifChassisTable 1 } IfChassisEntry ::= SEQUENCE { ifChassisFpc Integer32, ifChassisPic Integer32, ifChassisPort Integer32, ifChassisChannel Integer32, ifChassisLogicalUnit Integer32, ifChassisPicIndex OCTET STRING } ifChassisFpc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the FPC card on which the interface is located in the chassis. It is the chassis slot in which the FPC card is installed for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this object always starts from 1 according to Network Management convention. Therefore, a value of zero means there is no real or physical FPC associated with the specified interface." ::= { ifChassisEntry 1 } ifChassisPic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the PIC card on which the interface is located in the chassis. It is the PIC location on the FPC card for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this object always starts from 1 according to Network Management convention. Therefore, a value of zero means there is no real or physical PIC associated with the specified interface." ::= { ifChassisEntry 2 } ifChassisPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the port on the PIC card on which the interface is located in the chassis. It is the port number on the PIC card for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this object always starts from 1 according to Network Management convention. Therefore, a value of zero means there is no real or physical port associated with the specified interface." ::= { ifChassisEntry 3 } ifChassisChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The channel identifier for the specified interface if and only if it is part of a channelized interface. Although the channel is numbered from 0 and up in the interface naming, the return value for this object always starts from 1 according to Network Management convention. For the interface which could not be channelized, this object returns zero." ::= { ifChassisEntry 4 } ifChassisLogicalUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The logical unit number of the specified interface. It is the logical part of the interface that is configured on the physical or channel part if any. Although the logical unit number is numbered from 0 and up in the interface naming, the return value for this object always starts from 1 according to Network Management convention. For the interface which is really a physical device, this value returns zero." ::= { ifChassisEntry 5 } ifChassisPicIndex OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The index or indices for the Chassis MIB tables. This is the instance index which keys into the jnxContentsTable in Chassis MIB. For example, it could return an octet string of '8.1.2.0' - meaning a PIC ('8', first digit) at FPC slot 0 ('1-1', second digit minus one if nonzero) PIC number 1 ('2-1', third digit minus one if nonzero) port number whatever (fourth digit currently unused) - which in turn could be plugged in by NMS directly after any MIB objects in the jnxContentsTable, say 'jnxContentsDescr.8.1.2.0', so NMS could get that PIC object for the specified interface. This object is valid only for those interfaces having real and physical PIC cards. Otherwise, it returns an octet string of four zeros '0.0.0.0.'" ::= { ifChassisEntry 6 } -- -- This branch contains all Interface Level PFE Notifications data. -- ifJnxNotification OBJECT IDENTIFIER ::= { ifJnx 3 } ifJnxNotificationPrefix OBJECT IDENTIFIER ::= { ifJnxNotification 0} ifJnxErrors NOTIFICATION-TYPE OBJECTS { ifJnxCrcErrors, ifJnxFcsErrors } STATUS current DESCRIPTION "A ifJnxErrors notification is sent when the value of ifJnxCrcErrors or ifJnxFcsErrors increases." ::= { ifJnxNotificationPrefix 1 } -- -- This table augments ifTable -- ifJnxPolTable OBJECT-TYPE SYNTAX SEQUENCE OF IfJnxPolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table." ::= { ifJnx 4 } ifJnxPolEntry OBJECT-TYPE SYNTAX IfJnxPolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." INDEX { ifIndex } ::= { ifJnxPolTable 1 } IfJnxPolEntry ::= SEQUENCE { ifJnxInPolLowOctets Counter64, ifJnxInPolLowPkts Counter64, ifJnxInPolLow1SecRate Counter64, ifJnxInPolMLowOctets Counter64, ifJnxInPolMLowPkts Counter64, ifJnxInPolMLow1SecRate Counter64, ifJnxInPolMHighOctets Counter64, ifJnxInPolMHighPkts Counter64, ifJnxInPolMHigh1SecRate Counter64, ifJnxInPolHighOctets Counter64, ifJnxInPolHighPkts Counter64, ifJnxInPolHigh1SecRate Counter64, ifJnxInPolDropOctets Counter64, ifJnxInPolDropPkts Counter64, ifJnxInPolDrop1SecRate Counter64, ifJnxOutPolLowOctets Counter64, ifJnxOutPolLowPkts Counter64, ifJnxOutPolLow1SecRate Counter64, ifJnxOutPolMLowOctets Counter64, ifJnxOutPolMLowPkts Counter64, ifJnxOutPolMLow1SecRate Counter64, ifJnxOutPolMHighOctets Counter64, ifJnxOutPolMHighPkts Counter64, ifJnxOutPolMHigh1SecRate Counter64, ifJnxOutPolHighOctets Counter64, ifJnxOutPolHighPkts Counter64, ifJnxOutPolHigh1SecRate Counter64, ifJnxOutPolDropOctets Counter64, ifJnxOutPolDropPkts Counter64, ifJnxOutPolDrop1SecRate Counter64 } ifJnxInPolLowOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Low Bytes" ::= { ifJnxPolEntry 1 } ifJnxInPolLowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Low Pkts" ::= { ifJnxPolEntry 2 } ifJnxInPolLow1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Low 1 Sec Rate" ::= { ifJnxPolEntry 3 } ifJnxInPolMLowOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium Low Bytes" ::= { ifJnxPolEntry 4 } ifJnxInPolMLowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium Low Pkts" ::= { ifJnxPolEntry 5 } ifJnxInPolMLow1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium Low 1 Sec Rate" ::= { ifJnxPolEntry 6 } ifJnxInPolMHighOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium High Bytes" ::= { ifJnxPolEntry 7 } ifJnxInPolMHighPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium High Pkts" ::= { ifJnxPolEntry 8 } ifJnxInPolMHigh1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium High 1 Sec Rate" ::= { ifJnxPolEntry 9 } ifJnxInPolHighOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input High Bytes" ::= { ifJnxPolEntry 10 } ifJnxInPolHighPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input High Pkts" ::= { ifJnxPolEntry 11 } ifJnxInPolHigh1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input High 1 Sec Rate" ::= { ifJnxPolEntry 12 } ifJnxInPolDropOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Drop Bytes" ::= { ifJnxPolEntry 13 } ifJnxInPolDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Drop Pkts" ::= { ifJnxPolEntry 14 } ifJnxInPolDrop1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Drop 1 Sec Rate" ::= { ifJnxPolEntry 15 } ifJnxOutPolLowOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Low Bytes" ::= { ifJnxPolEntry 16 } ifJnxOutPolLowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Low Pkts" ::= { ifJnxPolEntry 17 } ifJnxOutPolLow1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Low 1 Sec Rate" ::= { ifJnxPolEntry 18 } ifJnxOutPolMLowOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Medium Low Bytes" ::= { ifJnxPolEntry 19 } ifJnxOutPolMLowPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Input Medium Low Pkts" ::= { ifJnxPolEntry 20 } ifJnxOutPolMLow1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Medium Low 1 Sec Rate" ::= { ifJnxPolEntry 21 } ifJnxOutPolMHighOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Medium High Bytes" ::= { ifJnxPolEntry 22 } ifJnxOutPolMHighPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Medium High Pkts" ::= { ifJnxPolEntry 23 } ifJnxOutPolMHigh1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Medium High 1 Sec Rate" ::= { ifJnxPolEntry 24 } ifJnxOutPolHighOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output High Bytes" ::= { ifJnxPolEntry 25 } ifJnxOutPolHighPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output High Pkts" ::= { ifJnxPolEntry 26 } ifJnxOutPolHigh1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output High 1 Sec Rate" ::= { ifJnxPolEntry 27 } ifJnxOutPolDropOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Drop Bytes" ::= { ifJnxPolEntry 28 } ifJnxOutPolDropPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Drop Pkts" ::= { ifJnxPolEntry 29 } ifJnxOutPolDrop1SecRate OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Interface Policer Output Drop 1 Sec Rate" ::= { ifJnxPolEntry 30 } -- -- This table augments ifTable -- ifJnxMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF IfJnxMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Juniper's extension to the interface media entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table." ::= { ifJnx 5 } ifJnxMediaEntry OBJECT-TYPE SYNTAX IfJnxMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." INDEX { ifIndex } ::= { ifJnxMediaTable 1 } IfJnxMediaEntry ::= SEQUENCE { ifJnxMediaType INTEGER, ifJnxMediaConfigSpeed Gauge32, ifJnxMediaSpeed Gauge32, ifJnxMediaMaxSpeed Gauge32, ifJnxMediaMode INTEGER, ifJnxMediaConfigMode INTEGER, ifJnxMediaAutoNegotiationEnabled TruthValue, ifJnxMediaLastFlap TimeTicks, ifJnxMediaLastUpdate TimeTicks, ifJnxMediaConfigHighSpeed Gauge32, ifJnxMediaConfigSpeedMap BITS, ifJnxMediaHighSpeed Gauge32 } ifJnxMediaType OBJECT-TYPE SYNTAX INTEGER { copper(1), fiber(2), others(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Media type of an interface." ::= { ifJnxMediaEntry 1 } ifJnxMediaConfigSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's configured bandwidth in bits per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifJnxMediaConfigHighSpeed must be used to report the interface's config speed. An interface which is configured to auto-negotiate, this speed will be zero. An interface which is configured to auto-negotiate with 10m-100m, this speed will be one." ::= { ifJnxMediaEntry 2 } ifJnxMediaSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifJnxMediaEntry 3 } ifJnxMediaMaxSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of maximum Speed that an interface can support in units of Gbps." ::= { ifJnxMediaEntry 4 } ifJnxMediaMode OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2), others(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An interface's current link mode." ::= { ifJnxMediaEntry 5 } ifJnxMediaConfigMode OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2), auto(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An interface's configured link mode." ::= { ifJnxMediaEntry 6 } ifJnxMediaAutoNegotiationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether port Auto-negotiation is enabled on the given physical port." ::= { ifJnxMediaEntry 7 } ifJnxMediaLastFlap OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of time from the last flap of interface state." ::= { ifJnxMediaEntry 8 } ifJnxMediaLastUpdate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of time from the last update of interface state." ::= { ifJnxMediaEntry 9 } ifJnxMediaConfigHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's configured bandwidth in units of 1,000,000 bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifJnxMediaEntry 10 } ifJnxMediaConfigSpeedMap OBJECT-TYPE SYNTAX BITS { auto(0), mbps10(1), mbps100(2), mbps1000(3), mbps2500(4), mbps5000(5), mbps10000(6), mbps25000(7), mbps40000(8), mbps50000(9), mbps100000(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's configured bandwidth. The bit 'auto(0)' indicates that the speed configured is auto-negotiation. The bit 'mbps10(1)' indicates that the speed configured is 10mbps. The bit 'mbps100(2)' indicates that the speed configured is 100mbps. The bit 'mbps1000(3)' indicates that the speed configured is 1000mbps. The bit 'mbps2500(4)' indicates that the speed configured is 2500mbps. The bit 'mbps5000(5)' indicates that the speed configured is 5000mbps. The bit 'mbps10000(6)' indicates that the speed configured is 10000mbps. The bit 'mbps25000(7)' indicates that the speed configured is 25000mbps. The bit 'mbps40000(8)' indicates that the speed configured is 40000mbps. The bit 'mbps50000(9)' indicates that the speed configured is 50000mbps. The bit 'mbps100000(10)' indicates that the speed configured is 100000mbps." ::= { ifJnxMediaEntry 11 } ifJnxMediaHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifJnxMediaEntry 12 } END