Hardware Compatibility Tool

SFP 1000Base-LX Gigabit Ethernet Optics, 1310 nm for 40 km transmission on single mode fiber

QSFP28 100G active optical cable for 10M

QSFP28 100G active optical cable for 15M

QSFP28 100G active optical cable for 1M

QSFP28 100G active optical cable for 20M

QSFP28 100G active optical cable for 30M

QSFP28 100G active optical cable for 3M

QSFP28 100G active optical cable for 5M

QSFP28 100G active optical cable for 7M

100GBASE-BXSR OM4 100m 850nm 70C

100G CWDM4 optics

QSFP28 100GBase-LR4 Optics for up to 10km transmission over serial SMF

QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF

QSFP28 100GBase-SR4 Optics for up to 100m transmission over parallel MMF

QSFP+ 40GBase-LR4 40 Gigabit Optics for up to 10km transmission on SMF

QSFP+ 40GBASE-LX4 40 Gigabit Optics for up to 150m transmission with OM4 over duplex MMF

QSFP+ 40G breakout into 4x10GBASE LR up to 10km SMF, MPO-12 APC Receptacle

40GBASE-BXSR OM3 100m 850nm 70C

Multiservices MPC

MX 3rd Gen Services Processing Card

MX2000 Switch Fabric Board, Base Bundle

MX2010/MX2020 Switch Fabric Board 2, Base Bundle

The MX2000-SFB3 Switch Fabric Board creates a highly scalable and resilient “all-active” centralized switch fabric that delivers up to 4 Tbps of full-duplex switching capacity per line card slot for MX2010 and MX2020 routers.

QSFP+ Cable Assy, 1m, 30AWG, Passive, Programmable ID

QSFP+ Cable Assy, 3m, 30AWG, Passive, Programmable ID

QSFP28 100G 4WDM-40 transceiver

QSFP-28, 100G-CWDM4 Transceiver

QSFP28 CWDM4 for <70C operation

QSFP28 100GBASE-DR; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 500 m; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP28 100G-ER4 Lite Ethernet only module

QSFP28 100G-FR/100GBASE-FR1; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 2 km; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP28 100G-LR/100GBASE-LR1; Media-Side RS (544,514) FEC enabled, Host-side CAUI-4 no FEC; SMF 10 km; Standard Temperature (0 through 70°C); Duplex LC connector

QSFP-28, 100G-LR4 Transceiver

100G-LR4 Ethernet only QSFP28 Module T2

QSFP28 100G base PSM4 optics for up to 500 m transmission over parallel SMF

QSFP28 100G SR BiDi Transceiver

QSFP-28, 100G-SR4 Transceiver

100G-SR4 Ethernet only QSFP28 Module T2

QSFP28 100G ZR4 Transceiver

QSFP28, 100GBASE-CWDM4

100GBASE-LR4 QSFP28 pluggable module, support only Ethernet rate

100GBASE-SR4 QSFP28 pluggable module, support only Ethernet rate

QSFP+ 40GBase-LR4 40 Gigabit Optics for up to 10km transmission on SMF

QSFP+ 40GBase-LX4 40 Gigabit Optics, 100m(150m) with OM3(OM4) duplex MMF fiber

QSFP+ 40GBase-ER4 40 Gigabit Optics, SMF for 40Km transmission
Note: Attenuators should be used when the module is in the optical loopback mode so as not to exceed the max Rx power and Rx damage thresholds.

40GE QSFP+ LR4 Pluggable Optics module

40GE QSFP+ SR4 Pluggable Optics module

40G QSFP+ breakout into 4x10GBASE LR Ethernet module

40G QSFP+ breakout into 4x10GBASE SR Ethernet module

Routing Engine - Quad Core 1.8GHz with 32G Memory, for MX

Routing Engine - Quad Core 1.8GHz with 16G Memory

Routing Engine - 6 Core 2.0GHz with 128G Memory

Routing Engine - 6 Core 2.0GHz with 64G Memory

The SCBE2-MX provides improved fabric performance for high-capacity line cards using the third generation fabric XF2 chip (MPC4E, MPC5E, MPC2/3 NG, and MPC7E).

The SCBE3-MX Enhanced Switch Control Board provides improved fabric performance and bandwidth capabilities for high-capacity line cards using the ZF-based switch fabric.