Loading...
| Parameter | Value |
|---|---|
| Cable type | SMF |
| Core size/cladding | 9/125 µm |
| Digital Diagnostic Monitoring | Module Case Temperature Supply voltage TX bias current TX power RX power |
| Distance | 2 m to 10 km |
| Effective modal bandwidth | (for MMF only) |
| Fiber grade | (for MMF only) |
| Form Factor (i.e., SFP, SFP+, XFP, CFP, etc..) | QSFP-DD800 |
| Max Distance(km) | 10 |
| Maximum Power consumption (W) | High Power Mode: 18 W Low Power Mode: 1.5 W |
| Operating Temperature (range) | 0 through 70 °C |
| Optic Type (Commercial Vs Service Provider Grade) | Commercial |
| Receive lane wavelengths (range) | 264.5 to 1277.5 nm 1284.5 to 1297.5 nm 1304.5 to 1317.5 nm 1324.5 to 1337.5 nm |
| Receiver input power, each lane (maximum) | 5.1 dBm |
| Receiver input power, each lane (minimum) | -9 dBm |
| Receiver sensitivity (OMA), each lane (maximum) | > 400G-LR4-10: For TECQ < 1.4 dB: -6.8 dBm For 1.4 dB ≤ TECQ ≤ 3.9 dB: -8.2 + TECQ dBm > 400GBASE-LR4-6: For TECQ < 1.4 dB: -6.8 dBm For 1.4 dB ≤ TECQ ≤ 3.4 dB: -8.2 + TECQ dBm |
| Signaling rate, each lane | Host lane: PAM4; 53.124 GBd ± 100 ppm Media lane: PAM4; 53.125 GBd ± 100 ppm |
| Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4) | > 100G Lambda MSA Group, 400G-LR4-10 > IEEE Std 802.3-2022 Clause 151,400GBASE-LR4-6 |
| Storage temperature | -40 through 85 °C |
| Stressed receiver sensitivity (OMA) each lane (maximum) | > 400G-LR4-10: -4.3 dBm > 400GBASE-LR4-6: -4.8 dBm |
| Supported Breakouts | (1) Maximum 2 instances of 400G-LR4-10 (2) Maximum 2 instances of 400GBASE-LR4-6 |
| Transmitter RMS spectral width (maximum) | (for MM only) |
| Transmitter fibers | 2 |
| Transmitter output power, each lane (maximum) | 5.1 dBm |
| Transmitter output power, each lane (minimum) | -2.7 dBm |
| Transmitter wavelengths (range) | 1264.5 to 1277.5 nm 1284.5 to 1297.5 nm 1304.5 to 1317.5 nm 1324.5 to 1337.5 nm |
| Typical Weight & Dimensions | Weight: 0.2 kg Height: 13.5 mm Width: 18.35 mm Depth: 93.26 mm |