Loading...
| Parameter | Value |
|---|---|
| Cable type | SMFMMFMMF |
| Core size/cladding | -62.5 µm (Refer the note below)50 µm (Refer the note below)
Note: According to IEEE Std 802.3-2018, Clause 38.11.14. An offset-launch mode-conditioning patch cord is required for MMF operation of 1000BASE-LX. o If the cabling is 62.5m MMF then the MMF used in the construction of the mode conditioner should be of type 62.5m MMF. o If the cabling is 50m MMF, then the MMF used in the construction of the mode conditioner should be of type 50m MMF. |
| Digital Diagnostic Monitoring | Tx PowerRx PowerTx Bias CurrentCase TemperaturePower Supply Voltage |
| Distance | 10 km550 m550 m |
| Effective modal bandwidth | -500 MHz x km500 MHz x km |
| MSA compliance (SFF, for e.g. SFF-8665) | INF-8074i |
| Max Distance(km) | 10 |
| Maximum Power consumption (W) | 1 W |
| NEBs (Yes or No) | Yes |
| Operating Temperature (range) | –5° C to 70° C |
| Optic Type (Commercial Vs Service Provider Grade) | Commercial |
| Receive lane wavelengths (range) | 1270 nm to 1355 nm |
| Receiver input power, each lane (maximum) | -3 dBm |
| Receiver input power, each lane (minimum) | -19 dBm |
| Signaling rate, each lane | 1.25 Gbps |
| Standards compliance (Ethernet/OTN Standard, for e.g. 100GBASE-LR4) | 1000BASE-LX |
| Storage temperature | –40° C to 85° C |
| Stressed receiver sensitivity (OMA) each lane (maximum) | -14.4 dBm |
| Transmitter output power, each lane (maximum) | -3 dBm |
| Transmitter output power, each lane (minimum) | -9.5 dBm |
| Transmitter wavelengths (range) | 1270 nm to 1355 nm |
| Typical Weight & Dimensions | Weight: 0.15 kgHeight: 8.55 mmWidth: 13.55 mmDepth: 57.5 mm |